Qlogic StorageWorks MPX200, User Manual

Page: 34 / 240

2–Command Reference
Command Syntax
2-10 ISR654601-00 D
Date
Displays or sets the date and time. To set the date and time, you must enter the
information in the format
MMDDhhmmCCYY (numeric representation of
month-date-hour-minute-century-year). The new date and time takes effect
immediately.
Each blade has its own independent date set. Properly setting the date ensures
that event log entries are dated correctly. The date must be set prior to applying
any feature keys or licenses.
Authority
Admin session required to set the date and time. No authority is required to
display the current date and time.
Syntax
date
[ MMDDhhmmCCYY ]
Keywords
[ MMDDhhmmCCYY ]
Specifies the date— this requires an Admin session. If you omit
[
MMDDhhmmCCYY ], the command displays the current date, which does not
require an Admin session.
Notes
Always set the time using Greenwich Mean Time (GMT) and Universal
Transverse Mercator (UTM).
You must disable the network time protocol (NTP) to set the time with the
date
command. Refer to the
set ntp
command on page 2-49 for information about
NTP.
Examples
The following examples show the
date
command:
iSR6200 <
1
> (admin) #> date 010214282010
Fri Jan 2 14:28:00 2010
iSR6200 <
1
> (admin) #> date
Fri Jan 2 14:28:14 2010