Qlogic StorageWorks MPX200, User Manual

Page: 148 / 240

5–Configuring Fibre Channel Initiators to iSCSI Storage
Configuration Overview
5-2 ISR654601-00 D
Step 1: Discover the iSCSI Targets
There are two ways to discover the iSCSI targets:
Using the iSCSI Discover Command
Using iSNS Server Connectivity
Using the iSCSI Discover Command
1. Issue the
show targets
command. For example:
iSR6200 <1> (admin) #> show targets
No Targets found.
2. Issue the
iscsi discover
command. For example:
iSR6200 <1> (admin) #> iscsi discover
The first attribute appears with the current value (in brackets). Type a new
value, or press the ENTER key to accept the current value. The next
attribute with the current value appears.
To stop this process before reaching the end of the list, press the Q+ENTER
keys.
In the following example, all the attributes are shown:
IP Address (IPv4 or IPv6) [0.0.0.0 ]
192.168.95.48
TCP Port No. [3260 ]
Outbound Port (1=GE1, 2=GE2, ...) [GE1 ] 3
Target CHAP (0=Enable, 1=Disable [Disabled ]
3. To see the target attributes, issue the
show targets
command. For
example:
iSR6200 <1> (admin) #> show targets
Target Information
--------------------
iSCSI
Name iqn.2001-05.com.equallogic:0-8a0906-7e33e0d06-83c835550
264bede-demo1
Alias
State Offline
IP Address 192.168.95.105 (Logged Out)