Qlogic StorageWorks MPX200, User Manual

Page: 109 / 240

2–Command Reference
Command Syntax
ISR654601-00 D 2-85
Show Portstats
Displays Fibre Channel or GbE port statistics.
Authority
None
Syntax
show portstats < fc | gige > < port-No > < hours | mins > < duration >
Keywords
fc
Specifies the display of Fibre Channel port statistics.
gige
Specifies the display of GbE port statistics.
mins
Specifies that display of statistics by the minute.
hours
Specifies the display of statistics by the hour.
Examples
The following examples show the
show portstats fc
command:
iSR6200 <1> #> show portstats fc 1 mins 10
This will display monitoring statistics of FC Port 1 for last 10 minute(s).
Statistics are displayed in reverse order.
If the router has been rebooted recently, the statistics are displayed
starting from the last reboot.
The statistics contain:
Current Date (once) at start, Time Stamp (TimeStamp),
TX bytes (TxByte), RX bytes (RxByte),
TX frames (TxFrame), RX frames (RxFrame),
FC Invalid CRC Count (CRCErr),
FC Link Failure Error Count (LinkErr),
FC Loss of Sync Error Count (LossSync),
FC Loss of Signal Error Count (LossSgnl),
FC Primitive Sequence Protocol Error Count (PSPErr)
FC Invalid Transmission Word Count (TXWrdErr)
Current Date 12/21/2010
TimeStamp TxByte RxByte TxFrame RxFrame CrcErr LinkErr LossSync LossSgnl PSPErr
TXWrdErr
--------- ------ ------ ------- ------- ------ ------- -------- -------- ------
------