Qlogic StorageWorks MPX200, User Manual

Page: 30 / 240

2–Command Reference
Command Syntax
2-6 ISR654601-00 D
Admin
Opens and closes an administrator (Admin) session. Any command that changes
the router configuration must be done in an Admin session. An inactive Admin
session will time out after 15 minutes.
Authority
Admin session
Syntax
admin
start (or begin)
end (or stop)
cancel
Keywords
start (or begin)
Opens the Admin session.
end (or stop)
Closes the Admin session. The
logout
,
shutdown
, and
reset
commands
also end an Admin session.
cancel
Terminates an Admin session opened by another user. Use this keyword with
care because it terminates the Admin session without warning the other user and
without saving pending changes.
Notes
Closing a Telnet window during an Admin session does not release the session.
When using Telnet, you must either wait for the Admin session to time out, or use
the
admin cancel
command.
Examples
The following example shows how to open and close an Admin session:
iSR6200 <
1
> #> admin start
Password : ******
iSR6200 <
1
> (admin) #>
.
.
.
iSR6200 <
1
> (admin) #> admin end
iSR6200 <
1
> #>