Qlogic StorageWorks MPX200, User Manual

Page: 27 / 240

2–Command Reference
Command Lists
ISR654601-00 D 2-3
Set “Set” on page 2-37
“Set Alias” on page 2-39
“Set CHAP” on page 2-41
“Set Chassis” on page 2-42
“Set FC” on page 2-43
“Set Features” on page 2-44
“Set iSCSI” on page 2-45
“Set iSNS” on page 2-46
“Set Mgmt” on page 2-47
“Set NTP” on page 2-49
“Set Properties” on page 2-50
“Set SNMP” on page 2-51
“Set System” on page 2-53
“Set VPGroups” on page 2-54
Show “Show” on page 2-55
“Show CHAP” on page 2-58
“Show Chassis” on page 2-59
“Show FC” on page 2-61
“Show FcipRoutes” on page 2-62
“Show Features” on page 2-63
“Show Initiators” on page 2-64
“Show Initiators LUN Mask” on page 2-66
“Show iSCSI” on page 2-67
“Show iSNS” on page 2-71
“Show Logs” on page 2-72
“Show LUNinfo” on page 2-73
“Show LUNs” on page 2-75
“Show Lunmask” on page 2-77
“Show Memory” on page 2-79
“Show Mgmt” on page 2-80
“Show NTP” on page 2-81
“Show Perf” on page 2-82
“Show Presented Targets” on page 2-89
“Show Properties” on page 2-92
“Show SNMP” on page 2-93
“Show Stats” on page 2-94
“Show System” on page 2-101
“Show Targets” on page 2-102
“Show VPGroups” on page 2-104
T “Target” on page 2-107
“Traceroute” on page 2-108
Table 2-2. CLI Blade Commands (Continued)
For Commands
Starting with:
Refer to Section: