Qlogic StorageWorks MPX200, User Manual

Page: 3 / 240

iSR6200 Command Line Interface (CLI)
User’s Guide
ISR654601-00 D iii
Updated the
show features
command exam-
ple output.
“Show Features” on page 2-63
Updated the
show initiators
command
example output.
“Show Initiators” on page 2-64
Updated the
show initiators lun mask
command example output.
“Show Initiators LUN Mask” on page 2-66
Updated the
show iscsi
command example
output.
“Show iSCSI” on page 2-67
Updated the
show luninfo
command example
output.
“Show LUNinfo” on page 2-73
Updated the
show lunmask
command example
output.
“Show Lunmask” on page 2-77
Updated the
show luns
command example out-
put.
“Show LUNs” on page 2-75
Updated the
show presented_targets fc
command example output.
“Show Presented Targets” on page 2-89
Added the new
portstats
keyword to th
e
show stats
command and added command
examples output.
“Show Stats” on page 2-94
Added new
show portstats
command. “Show Portstats” on page 2-85
Added new
show statsfcip
command. “Show Statsfcip” on page 2-99
Added the
Time To Target Device Offline
and
BIOS Version
information, and updated the
SW Version
and
No. of FC Ports
informa-
tion in the
show system
command example out-
put.
“Show System” on page 2-101
Updated the
show targets iscsi
command
example output.
“Show Targets” on page 2-102
In the second paragraph, changed the references
to the default virtual port group from “VPG 0” to
“VPG 1,” and changed “target world wide port
number (WWPN)” to “Fibre Channel Storage
array” Chapter 4 Virtual Port Groups
Added new chapter with instructions for connecting
Fibre Channel hosts to iSCSI Dell EqualLogic tar-
gets using the iSR6240 and iSR6250 routers. Chapter 5 Configuring Fibre Channel Initiators to
iSCSI Storage
Updated the
show fc
command example output
for VPGs.
“Enabling Virtual Port Groups” on page 4-3