Qlogic StorageWorks MPX200, User Manual

Page: 22 / 240

1–CLI Usage
Installing the Firmware Via Telnet
1-6 ISR654601-00 D
ftp> put iSR6200_FRU.bin
200 PORT command successful.
150 Opening BINARY mode data connection for 'iSR6200_FRU.bin'.
226 Transfer complete.
ftp: 6168 bytes sent in 0.00Seconds 6168000.00Kbytes/sec.
ftp> quit
221 Goodbye.
2. To update a blade with the saved configuration data (see page 2-16 ),
execute the
fru restore
command. The
fru restore
command has
the following two options:
Full restore —Restores all router configuration parameters, including
IP addresses, subnet masks, gateways, virtual port group settings,
LUN mappings, and all other persistent data.
Partial restore —Restores only the LUN mappings and persistent
data, such as discovered Fibre Channel targets and iSCSI initiators.
Installing the Firmware Via Telnet
This section provides the steps required for installing the iSR6200 router firmware.
To install the firmware via Telnet:
1. Download the iSR6200 Router firmware to your workstation from the QLogic
Web site:
http://driverdownloads.qlogic.com/QLogicDriverDownloads_UI/default.aspx
2. Change to the directory where the firmware image file is located.
3. Unzip the firmware file before proceeding to the next step.
4. Transfer the image from your workstation to the router. For example:
a. On your workstation, open a command window. (On a Windows OS,
click
Start , and then click Run . In the Run dialog box, type
cmd
, and
then click OK .)
b. Change to the directory where the firmware image file is located:
C:\> cd \fwImage
(example directory containing the firmware
image)