Qlogic StorageWorks MPX200, User Manual

Page: 40 / 240

2–Command Reference
Command Syntax
2-16 ISR654601-00 D
FRU
Saves and restores the router’s configuration.
Authority
Admin session to restore
Syntax
fru
restore
save
Keywords
restore
The
fru restore
command requires that you first FTP the
tar
file containing
the configuration to the router. When you issue this command, the system
prompts you to enter the restore level. You can fully restore the router’s
configuration (all configuration parameters and LUN mappings) or restore only the
LUN mappings. The restored configuration does not take effect until the router is
rebooted.
save
The
fru save
command creates a
tar
file containing the blade’s persistent
data, configuration, and LUN mappings. The file is stored in the router’s
/var/ftp
directory. You must then FTP the
tar
file from the router.
Examples
The following example shows the
fru restore
command:
iSR6200 <
1
> (admin) #> fru restore
A list of attributes with formatting and current values will
follow. Enter a new value or simply press the ENTER key to accept
the current value. If you wish to terminate this process before
reaching the end of the list press 'q' or 'Q' and the ENTER key to
do so.
Type of restore (0=full, 1=mappings only) [full]
FRU restore completed.
Please reboot the system for configuration to take affect.
The following example shows the
fru save
command:
iSR6200 <
1
> (admin) #> fru save
FRU save completed. Configuration File is QLogic_Router_FRU.bin
Please use FTP to extract the file out from the System.