Qlogic StorageWorks MPX200, User Manual

Page: 142 / 240

4–Virtual Port Groups
Enabling Virtual Port Groups
4-4 ISR654601-00 D
The following example shows the output from the CLI for an iSR6200 blade with
three virtual port groups enabled. You can display information about the virtual
port groups configured on your iSR6200 with the
show vpgroups
command:
iSR6200 <1> (admin) #> show vpgroups
VpGroup Information
---------------------
Index 1
VpGroup Name VPGROUP_1
Status Enabled
WWPNs 21:00:00:c0:dd:13:16:f8
21:00:00:c0:dd:13:16:f9
Index 2
VpGroup Name VPGROUP_2
Status Enabled
WWPNs 21:01:00:c0:dd:13:16:f8
21:01:00:c0:dd:13:16:f9
Index 3
VpGroup Name VPGROUP_3
Status Enabled
WWPNs 21:02:00:c0:dd:13:16:f8
21:02:00:c0:dd:13:16:f9
Index 4
VpGroup Name VPGROUP_4
Status Disabled
WWPNs N/A
Note that in the world wide port number (WWPN), the second byte from the left
(for example,
21: 01 :00:c0:dd:13:16:f8
) denotes the virtual port group ID, and
the right most byte (for example,
21:
01
:00:c0:dd:13:16: f8
) denotes the
physical Fibre Channel port. In this example VPGs 1 through 3 have
corresponding virtual ports with
00
,
01
, and
02
presented out of physical Fibre
Channel ports 0 and 1, with WWPNs ending in
f8
and
f9
, respectively.