Corporate
800.882.8854
35
System Start-up (Continued)
Checking Oxygen Concentrator
on Systems with Ozone Option (if
equipped)
The Oxygen Concentrator is preset
at the Factory. The purpose of the
concentrator is to send pure oxygen
to the ozone generator (O2) where it
will be turned into ozone (O3)
This component has an on / off
switch on the right side of the unit
& should be in the on position and
illuminated green. It will be running
when the Reclaim Machine is in
“Auto” with the pump running. There
are two key items to Check on the
right side: 1) The switch is on and
“green”. 2) The pressure gauge is
at 11.5psi and steady. There is one
item to check on the left side of the
unit.
There is a flow meter that is
preset at the factory to 6 with the
line disconected.
When running, the
flow meter will typically be in the 2-4
range with the line attached.
The Oxygen Concentrator will need
replacement or rebuild after 16,000
hours. It has an internal hour meter
which can be accessed by removing
the cover. The Reclaim Machine
Touch Screen will flag the end user
with a half life message at 8,000
elapsed hours of run time and a
full life message at 16,000 hours to
indicate it is time for replacement.
Front View
NOTE:
The “Gen
3” Reclaim System
has the Oxygen
Concentrator on the
lower left of the frame.
This location has a
higher risk of water
leak entering the
cooling fan assembly
so a “splash guard”
has been added. Be
certain to transfer
the splash guard if
the concentrator is
replaced!!!
Right Side Left Side
Summary of Contents for PURWATER RECLAIM 3.0
Page 2: ...Corporate 800 882 8854 2...
Page 4: ...Corporate 800 882 8854 4...
Page 6: ...Corporate 800 882 8854 6...