Corporate
800.882.8854
29
System Start-up
Please note:
The Touch Screen Buttons are called out F1, F2, F3 and F4. They are called
out by their F numbers when they are not used for their primary functions. Example:
Press F3 in Auto mode; the system is already in Auto, the button then serves as a special
function, F3. However, Off and Hand still will serve as Off and Hand if the system is in
Auto. Press and hold Hand, Off, Auto, or Settings butttons firmly until you see desired
action or change in screen. These functions (and other screen responses) are also
accessed via the Touch Screen itself. When scrolling through menus, wait 5 seconds
between pressing buttons, an easy way to be sure of the time is to wait until prompted to
press a button by the HMI. If system is left in any screen other than the default for two
minutes without a button being pressed, the program will revert it back to the default screen
for that mode.
Checking Pump Rotation
On power up - the intial screen is shown
on the right.
Go to “Hand Mode” by either the “F1”
button or touching “Hand” option on the
Touch Screen resulting in the screen shot
on the right.
Go to the diagnostics menu by either
the “F4” button or by touching the
“Diagnostics Menu”
Activate the “Jog Pump Reclaim” function
via the Touch Screen. This will make the
pump rotate for a few seconds.
Summary of Contents for PURWATER RECLAIM 3.0
Page 2: ...Corporate 800 882 8854 2...
Page 4: ...Corporate 800 882 8854 4...
Page 6: ...Corporate 800 882 8854 6...
