Corporate
800.882.8854
25
Setting the Time and Date on the PLC
(“Gen 3” Machines Built after January 1, 2020)
Prior to System Start Up and with the
Reclaim connected to facilities power.....
Touch the “Menu” button on the touch
screen
Touch the “System Settings” button on the
touch screen.
Touch the “Next” button on the touch
screen which takes the operator to the
final screen on the lower left.
After arriving at this screen, the Date and
Time can be set. A stylus can be handy
to have on hand, however, a well placed
finger will also work fine. The Year, Month,
Day, and Time were set at the factory for
testing and may still be correct in part. If
not, touch the box for any parameter which
must be set. This will take the operator to
the screen below for the correct number
to be input. Once the input is correct, set
it into memory using the “carriage return”
key below.
Once everything is set, the correct time
and date will be in the upper right hand
corner. Touch the “Off” button to exit
Summary of Contents for PURWATER RECLAIM 3.0
Page 2: ...Corporate 800 882 8854 2...
Page 4: ...Corporate 800 882 8854 4...
Page 6: ...Corporate 800 882 8854 6...
