Pulse-Eight neo:X+, Product User Manual

Page: 10 / 92

CONNECTION TERMINATION
Whenever possible, use full plastic encasement. We do not recommend metal ones to avoid grounding
leaks to Pulse-Eight products. Terminate the cabling using RJ45 connectors to the 568B wiring
standard. (See diagram)
IMPORTANT: Please note that local building regulations may apply to the installation of
cabling in properties. It is important to check building regulations to guarantee that you
are in accordance with the laws of your territory.
IR PIN ASSIGNMENTS
We highly recommend you purchase a Pulse-Eight Mono-Stereo Optocable if you wish to convert this
into a 3.5 mm stereo jack. However, if you choose to rewire the IR bud this will void your warranty on the
IR accessory.
A. 5V
B. IR Signal
C. Ground