Pulse-Eight neo:X+ Product User Manual Download Page 16

Page: 16 / 92

CONNECTING TO ADMIN WEB INTERFACE

18. Using a computer connected to same router/network, access and login to the Web Interface by
visiting

www.gotomymatrix.com

in your web browser.

19. Activate administrative rights by clicking on the

Cloud Connection

tab on the left hand nav, then

click on the '

[Admin]

' link at the foot of the page.

20. Whilst on the

Cloud Connection

page, insert your Installer ID into the box and save changes - this

will enable the matrix to be linked to your monitoring account. If you have not set up an installer ID
please contact your Pulse-Eight representative.

21. Within this interface are many setup options - please refer to the full installation guide for further
details.

LED STATUS

22. Check the LEDs on the HDBaseT ports of the Receiver and Transmitter to ensure correct installation
and connection:

Summary of Contents for neo:X+





























































































Search results

Summary of Contents for neo:X+

Reviews:

Related manuals for neo:X+

Brands by name

Popular brands

Pulse-Eight neo:X+, Product User Manual

Search results

Summary of Contents for neo:X+

Reviews:

Related manuals for neo:X+

Brands by name

Popular brands