l
Overall stability improvements
l
The system does not erase part of the configuration if the flash update gets interrupted (powered
off during update)
l
Routing to hidden bays is working and should not be rejected
l
ARC initialisation by an external source working now
Additional
FREQUENTLY ASKED QUESTIONS (FAQ)
page for a more updated FAQs.
NEO:X+ CONTROL 4 DRIVER
Initial Setup
If Device IP Address has not been set, click on the Actions tab, then click “Discover System” this will
send out a query to determine the local IP address of the system, if this fails you can visit
for further help
Configuring your Installer Id
Before you complete your installation, it is important that you set your Installer Id. This value is used to
register this system to your monitoring account so you can monitor and support the system remotely.
On the properties tab enter your 4-digit Installer Id and click set. Setting this value will also trigger a
Monitoring Pulse to be sent so it should appear in your account immediately.
Properties
On the properties tab you can examine various core values about the system, these are read only and
automatically updated every few seconds.
If something is not working correctly you can enable
Log Mode
, set this option to
and the
Log
Level
to
5 – Debug
for maximum information.
Actions
There are currently three buttons available in ComposerPro for this driver:
l
Reboot System: Restarts the system immediately, doing so will interrupt video routing briefly
l
Discover System: Used to automatically discover the Device IP Address of the system where
possible
l
Send Monitoring Pulse: Trigger an immediate monitoring pulse to be sent, returning current
system health data to monitoring.pulse-eight.com
Summary of Contents for neo:X+
