Pulse-Eight neo:X+, Product User Manual

Page: 8 / 92

I. HDMI Inputs Connect the appropriate high speed HDMI cable to each input. These cables should
then be connected to the Source device. (Blu-Ray player etc.)
J. Control IR Input General IR input designed for legacy control systems or where direct IR input is
required (we recommend the use of our IP driver instead of this port, where applicable). Please
see full manual for more information.
K. Reset Factory reset - please use only when instructed by our customer service team.
L. Global IR Used for a control system to be able to see all IR signals from all zones. We recommend
using a P8-IR-Optocable for connectivity from this port to your control system. Please see full
manual for more information.
M. Ethernet Connect to network - required for connection to Web Interface, Third Party Control and
Cloud Remote Monitoring Portal.
N. Audio Inputs Optical and Digital Coax options
O. HDMI IR In Connect as required. The HDMI IR In ports are to be used to return IR back to the
matrix using an P8-IR-Optocable.
P. HDMI Outputs Connect the appropriate high speed HDMI cable to each output. These cables
should then be directly connected to each Sink device. (TV/Amplifier etc.)
IR BUDS
The IR Emitter is to be mounted over the source's IR window. The IR Receiver bud should be mounted
underneath the sink (TV) with the smallest end forwards and the sticky pad affixed upwards.
Our video matrixes use the standard 3.5mm stereo jack, with a 5V tip, Signal Ring and GND sleeve.
IR Receiver
IR Emitter