Pulse-Eight neo:X+, Product User Manual

Page: 7 / 92

Panel
A. System Health LED Indicates whether matrix is turned on and healthy (green), or if there is an
issue present (red).
B. Network LED Indicates the matrix is connected to the internet through its network link (green) or if
there is an issue (red).
C. Cloud LED Indicates the matrix is able to connect to the Pulse-Eight Remote Monitoring Portal
(green) if there is an issue (red).
D. Power Connector Power connector with OFF/ON switch. Use supplied power cord to connect the
power.
E. IR Receiver and Transmitter Ports Connect as required. The IR Out port is to be used to
connect input devices using the supplied IR Emitters.
F. RS232 Phoenix Ports Ground = Zero volts. TX is signal coming out of matrix (from remote
device) RX is signal going into matrix (to remote device).
G. Audio Outputs Analogue, Optical and Digital Coax options for Audio Breakouts.
H. HDBaseT Outputs Connect the appropriate Cat5e or higher grade cable to each output. These
cables should then be connected to a neo Receiver at each Sink device. (TV/Amplifier etc.).