Pulse-Eight neo:X+ Product User Manual Download Page 28

Page: 28 / 92

Another way to check the link quality remotely is by logging into your installer account at

monitoring.pulse-eight.com

CLOUD CONNECTION TAB

Under the

Cloud Connection

tab you will see basic monitoring information:

System Status:

This colour coded status will notify you if the system is healthy or if there is an issue.

Last Monitoring Pulse Sent:

This will detail when the matrix last 'phoned home'.

Installer ID:

Enter your Installer ID to link to the Pulse-Eight Monitoring Portal.

Note: If you do not know your Installer ID, please check your cloud monitoring portal or contact your
Pulse-Eight sales representative.

Connection Status:

This will detail if the matrix is connected to the Pulse-Eight Monitoring Portal.

Alexa:

This matrix can be controlled by Alexa voice control, set this up by clicking on the '

Setup Voice

Services

' button. See next section for further details.

Summary of Contents for neo:X+





























































































Search results

Summary of Contents for neo:X+

Reviews:

Related manuals for neo:X+

Brands by name

Popular brands

Pulse-Eight neo:X+, Product User Manual

Search results

Summary of Contents for neo:X+

Reviews:

Related manuals for neo:X+

Brands by name

Popular brands