PRONAR ZKP800, Operator'S Manual, Page: 96 / 102

Pronar ZKP800 FIRST ASSEMBLY MANUAL
A.2
A.1 PREPARATION
Due to its large overall dimensions, Pronar ZKP800 rotary rake is partially dismantled for
shipment and transport on a motor vehicle. Before the first start, the rotary rake has to be
assembled in order to be prepared for normal operation. It is absolutely necessary to
carefully read this manual before assembling the rotary rake. The persons who assemble the
rotary rake should have sufficient know-how, appropriate technology and qualifications for
this type of work.
The following parts of the rotary rake are disassembled before transport:
•
complete raking assemblies with chassis - 2 items,
•
tubular shields - 2 items,
•
brackets of tubular shields - 2 items,
•
raking arms - 22 items,
•
PTO shafts with overload safety clutch - 2 items,
•
forming shield - 1 item.
Warning boards with lights are turned by 180° and b olted to axle system bracket. Single
items and fasteners necessary for assembling the rotary rake are delivered in special bags.
After preliminary assembly, operation of the machine must be tested. All bolt and nut
connections must be checked and retightened after 50 hours of work.
ATTENTION!
Do NOT perform assembly work under raised and unsupported machine.
Exercise particular caution while assembling the machine. Make certain that all safety
conditions are adhered to.
During assembly work, the tractor and rotary rake must be protected against rolling.