PRONAR ZKP800, Operator'S Manual, Page: 29 / 102

SECTION 2 Pronar ZKP800
2.5
•
Do not exceed the maximum speed when travelling. Adjust driving speed to the
road conditions.
•
Secure moving parts of the machine so as to eliminate any dangers posed by
these parts while the machine is in motion.
•
Do NOT leave tractor driver's seat when the tractor is moving.
•
The machine must NOT be left unsecured. The rotary rake uncoupled from tractor
must be secured against rolling away with wheel chocks placed under the wheels.
•
While driving on public roads the rotary rake must be fitted with a certified or
authorised reflective warning triangle.
2.1.4 HYDRAULIC SYSTEM
•
The hydraulic system is under high pressure when operating.
•
Use the hydraulic oil recommended by the Manufacturer. Never mix two types of
oil.
•
Regularly check the technical condition of the connections and the hydraulic lines.
There must be no oil leaks.
•
In the event of malfunction of the hydraulic system, the machine shall be
disconnected from use until the malfunction is corrected.
•
Before beginning repair works on hydraulic systems, reduce oil pressure.
•
In the event of injuries being caused by pressurised hydraulic oil, contact a doctor
immediately. Hydraulic oil may find its way under the skin and cause infections.
•
Rubber hydraulic conduits must be replaced every 4 years regardless of their
technical condition.
2.1.5 OPERATION WITH PTO
•
The rotary rake may only be connected to the tractor by appropriately selected
PTO shaft recommended by the Manufacturer.
•
Before using the machine the user should thoroughly acquaint himself with the
PTO shaft Operator's Manual and adhere to the recommendations contained in it.
•
PTO shaft may be connected and disconnected only if: