PRONAR ZKP800, Operator'S Manual, Page: 16 / 102

Pronar ZKP800 SECTION 1
1.4
•
comply with general safety regulations while working,
•
prevent accidents,
•
comply with the road traffic regulations and transport regulations in force in a
given country, in which the machine is used,
•
carefully read the Operator's Manual and comply with its recommendations,
•
only hitch the rotary rake to an agricultural tractor, which fulfils all the
requirements made by the rotary rake's Manufacturer.
The rotary rake may only be used by persons, who:
•
are familiar with the contents of this publication and with the contents of the
agricultural tractor Operator's Manual,
•
have been trained in rotary rake operation and safe operation,
•
have the required authorisation to drive and are familiar with the road traffic
regulations and transport regulations.
TAB. 1.1 Agricultural tractor's requirements
CONTENTS UNIT REQUIREMENTS
Rear three-point linkage
Category - I or II according to ISO 730-1
Power take-off shaft
Rotation speed
PTO type
RPM
-
540
type 1 according to ISO 500 (nominal
diameter 35 mm, 6 splines)
Hydraulic system
Hydraulic oil
Pressure rating of the system
-
-
bar / MPa
One double acting s one
single-acting section with floating
position
L-HL32 Lotos
(1)
160 / 16
Electrical system
Electrical system voltage
Connection socket
V
-
12
7 polar compliant with ISO 1724