PRONAR ZKP800, Operator'S Manual, Page: 59 / 102

SECTION 4 Pronar ZKP800
4.11
FIG. 4.2 mounting of raking arms
(1) raking arm, (2) locking cotter pin, (3) main frame
Operating the hydraulic cylinders, lift the lifting arms together with raking
assemblies until cylinder lock (2) is engaged– figure (4.3).
The raking assemblies will be automatically locked when they
are in vertical position.
Make sure that lock (2) keeps the raking assembly in vertical position.
Close cylinder valve (3) by switching it to „0” position.
When setting the rotary rake in transport position, the swath metal plate must
be raised.
Prior to moving off, check the lights.