PRONAR ZKP800, Operator'S Manual, Page: 54 / 102

Pronar ZKP800 SECTION 4
4.6
•
other suspected faults
immediately cut off oil supply, disconnect tractor PTO drive and identify a fault. If a fault
cannot be rectified or the repair could void the warranty, please contact the retailer or directly
the manufacturer for additional clarifications or to perform the repair.
ATTENTION!
Check correctness of hydraulic connections. Replace line plugs possibly.
Non-adherence to the recommendations stated in the Operator's Manual or improper use
of the rotary rake may cause damage to the machine.
The technical condition before starting the machine must be no cause for concern.
4.2 TECHNICAL CONDITION INSPECTION
When preparing the rotary rake for normal use, check individual elements according to
guidelines presented in table (4.1).
TAB. 4.1 Technical inspection schedule
DESCRIPTION SERVICE OPERATION FREQUENCY
Technical condition of protective
shields
check the technical condition of safety
guards, if complete and correctly
mounted.
technical condition of PTO shaft,
its shields and securing chains, Inspect visually and check
completeness
Check mounting of springtines to
raking arms Ensure that springtines are correctly
tightened.
B
e
fo
re
e
a
c
h
u
s
e
Check technical condition of tyres
and tyre pressure, Visually inspect the tyres and if they are
properly inflated.
oil level in intersecting axis gear of
drive system, For details please refer to section
DRIVE SYSTEM OPERATION
B
e
fo
re
e
a
c
h
u
s
e