PRONAR ZKP800, Operator'S Manual, Page: 33 / 102

SECTION 2 Pronar ZKP800
2.9
•
The lifted machine must not be supported using fragile elements (bricks, hollow
bricks or concrete blocks).
•
After completing work associated with lubrication, remove excess oil or grease.
•
After changing the hydraulic oil, the used oil should be properly disposed of.
•
Check the tyre pressure regularly.
•
Repair work on the wheels or tyres should be carried out by persons trained and
entitled to do so. This work should be carried out using appropriate tools.
•
Each time a wheel is fitted, always check how firmly the nuts are tightened.
Inspection should be carried out each time after the first use, after the first
journey, after travelling 1 000 km and then every 6 months of use. The above
actions should be repeated individually if a wheel has been removed from the
wheel axle.
2.2 DESCRIPTION OF RESIDUAL RISK
Pronar Sp. z o. o. in Narew has made every effort to eliminate the risk of accidents. There is,
however, a certain residual risk, which could lead to an accident, and this is connected
mainly with the actions described below:
•
using the rotary rake for purposes other than those for which it is intended,
•
being between the tractor and the rotary rake while the engine is running and
when the machine is being attached,
•
being on the machine while the engine is running,
•
operating the rotary rake with the safety guards removed or faulty,
•
not maintaining safe distance from the danger zone or being within the zones
while the rotary rake is operating,
•
operation of the rotary rake by persons under the influence of alcohol,
•
oil leaks and sudden movement of elements resulting from line cracking,
•
cleaning, maintenance and technical checks of the rotary rake when the tractor's
engine is running,