PRONAR ZKP800, Operator'S Manual, Page: 56 / 102

Pronar ZKP800 SECTION 4
4.8
4.3 HITCHING TO TRACTOR
In order to attach the rotary rake to tractor, proceed as follows:
Reversing the tractor bring the lower three point linkage connection points (C)
of the tractor close to pins (1) of the rotary rake.
Set links (C) of tractor at appropriate height.
Switch off tractor engine, secure cab to prevent unauthorised access.
Connect lower pins (1) with linkage arms (C) and lock with the aid of cotter
pins,
Connect hydraulic lines to the tractor,
Plugs of line (6) (see figure (3.5)) should be connected to the
section with so-called "floating position"
Plugs of line (7) (see figure (3.5)) should be connected to the
double acting section in the tractor. Plugs should be marked in
order to exclude the possibility of wrong connection.
Lift rotary rake using tractor's three point linkage.
Raise the left and right support (2) and secure with cotter pins (4).
Set both tractor lower linkage arms at the same height.
ATTENTION!
Prior to attaching the rotary rake, check the technical condition of the rotary rake's and
tractor's hitch system and connection elements of the hydraulic and electrical systems.
The hydraulic oils in the tractor and the rotary rake must be mixable.
Be especially careful when hitching the machine to tractor.
When hitching is completed, secure the electrical leads and hydraulic lines in such a
way that they do not become entangled in tractor's moving parts and are not at the risk
of breaking or severed when making turns.
Parking supports must be maximally raised during machine operation or travel.