PRONAR ZKP800, Operator'S Manual, Page: 78 / 102

Pronar ZKP800 SECTION 5
5.10
Checking tyre pressure and steel rims:
•
at regular intervals (100 h),
•
if needed.
5.3 DRIVE SYSTEM MAINTENANCE
Drive system maintenance includes general inspection, change or topping up gear oil in the
rotary rake's intersecting axis gear. In the event of damage to transmission, contact
authorised service point in order to perform repairs.
DANGER
Do NOT perform service or repair work under raised and unsupported machine.
Check oil level in intersecting axis gear daily.
To check the oil level in intersecting axis gears:
•
set the rotary rake horizontally,
•
unscrew inspection plug (2),
•
oil level should reach the lower edge of the inspection plug opening (2),
•
if necessary, supplement oil through inlet opening (1) to the required level.
DANGER
When checking oil level and changing oil, use appropriate personal protection
equipment i.e. protective clothing, safety shoes, gloves, safety goggles. Avoid contact of
skin with oil.