PRONAR ZKP800, Operator'S Manual, Page: 32 / 102

Pronar ZKP800 SECTION 2
2.8
•
In order to reduce the danger of fire the machine must be kept in a clean
condition.
•
During the warranty period, any repairs may only be carried out by Warranty
Service authorised by the manufacturer. After the expiry of the warranty period it
is recommended that possible repairs to the machine be performed by specialised
workshops.
•
In the event of any fault or damage whatsoever, do not use the rotary rake until
the fault has been fixed.
•
During work use the proper, close-fitting protective clothing, gloves and
appropriate tools.
•
Servicing and repair work should be carried out in line with the general principles
of workplace health and safety. In the event of injury, the wound must be
immediately cleaned and disinfected. In the event of more serious injuries, seek a
doctor's advice.
•
Regularly check the condition of the bolt and nut connections.
•
Should it be necessary to change individual parts, use only original parts. Non-
adherence to these requirements may put the user and other people's health and
life at risk, and also damage the rotary rake and invalidate the warranty.
•
Before welding or electrical work, the machine should be disconnected from the
power supply.
•
The paint coating should be cleaned off before beginning welding work. Burning
paint fumes are poisonous for people and animals. Welding work should be
carried out in a well lit and well ventilated space.
•
During welding work, pay attention to flammable or fusible elements (parts of the
electric and hydraulic systems, plastic parts). If there is a risk that they will catch
fire or be damaged, they should be removed before commencing welding work.
•
In the event of work requiring the rotary rake to be raised, use properly certified
hydraulic or mechanical lifts for this purpose. After lifting the machine, stable and
durable supports must also be used. Do NOT carry out work under a machine,
which has only been raised with the lift jack.