![background image](http://html.mh-extra.com/html/promise-technology/pegasus3-r4/pegasus3-r4_product-manual_1617248035.webp)
22
Promise
Technology
Pegasus3 Series
Step 3: Power On Pegasus3
Follow these steps to connect the power cord and power on the Pegasus3.
1.
Attach the power cord on the back of the Pegasus3 unit.
(See
to see an illustration of the back of device)
2. Plug the other end into a power source.
3. Press the Power Button. (See illustration of front of device below).
You will observe that the
Power Button
LED turns orange.
It takes about 30 seconds to boot the Pegasus3 unit. When fully booted:
• The Power Button LED turns blue.
• The drive carrier Power / Status LEDs turn blue.
Pegasus3 boot up LED behavior
Power
Button / LED
Drive Power /
Status LED
Thunderbolt 3
Activity LED
Summary of Contents for Pegasus3 R4
Page 4: ...iv Promise Technology Pegasus3 R4 R6 R8 VCCI KCC FCC ...
Page 5: ...v About this guide Pegasus3 Product Manual WARNING WARNING WARNING WARNING ...
Page 80: ...67 Managing the Pegasus3 Pegasus3 Product Manual Controller Settings ...
Page 207: ...194 Promise Technology Pegasus3 R4 R6 R8 View NVRAM Events ...