Promise Technology Pegasus3 R4 Product Manual Download Page 67

Page: 67 / 232

Promise

Technology

Pegasus3 Series

Back View

Go to

Admin

drop-down menu and choose the

Back View

option to see a virtual view of the back of

the Pegasus3. Move the cursor over the Power Supply (PSU) or system fan, and component status

information is displayed.

Highlight Arrays

Click the

Highlight Arrays

button to identify the physical drives assigned to a disk array, these appear

colored purple.

Click on of the following items in the drop-down menu:

•

All DA – Show all disk arrays

• DA0 (DA1, DA2, etc.) – a specific disk array

•

close – Click to close the menu and return to normal view.

The carriers containing drives that do not belong to the chosen disk array will be highlighted.

Device - Back View display menu

Summary of Contents for Pegasus3 R4








































































































































































































































Search results

Summary of Contents for Pegasus3 R4

Reviews:

Promise Technology Pegasus3 R4, Product Manual, Page: 67 / 232

Search results

Summary of Contents for Pegasus3 R4

Reviews: