Promise Technology Pegasus3 R4 Product Manual Download Page 186

Page: 186 / 232

173

Technology Background

Pegasus3 Product Manual

RAID 1

A RAID 1 Source logical drive can migrate to the following Target logical drives:

Target

Requirements

RAID 0

Add physical drives.

RAID 1

2 physical drives only.
Only a single-drive RAID 0 can migrate to RAID 1 by adding 1 physical drive.

RAID 1E

3 or more physical drives.
If existing physical drives have no unused space, add 1 or more physical

drives.

RAID 5

3 physical drives minimum, maximum 4 (R4), 6 (R6) or 8 (R8).
RAID 0 must have less than 4 (R4), 6 (R6) or 8 (R8) physical drives. If existing

physical drives have no unused space, add 1 or more physical drives.

RAID 6

4 physical drives minimum, 4 (R4), 6 (R6) or 8 (R8).
If existing physical drives have no unused space, add 1 or more physical

drives.

RAID 10

4 physical drives minimum. Even number of physical drives. If existing

physical drives have no unused space, add 1 or more physical drives.

RAID 50

6 physical drives minimum.

RAID 60

8 physical drives minimum.

See “Migrating a Logical Drive” on page 144.

RAID 0

A RAID 0 source logical drive can migrate to the following target logical drives:

Target

Requirements

RAID 0

None.

RAID 1E

3 or more physical drives.
Add 1 or more physical drives.

RAID 5

3 physical drives minimum, maximum 4 (R4), 6 (R6) or 8 (R8).
RAID 1 must have less than 4 (R4), 6 (R6) or 8 (R8) physical drives. Add 1 or

more physical drives.

RAID 10

4 physical drives minimum. Even number of physical drives. Add 2 or more

physical drives.

RAID 50

6 physical drives minimum.

See “Migrating a Logical Drive” on page 144.

Summary of Contents for Pegasus3 R4








































































































































































































































Search results

Summary of Contents for Pegasus3 R4

Reviews:

Promise Technology Pegasus3 R4, Product Manual, Page: 186 / 232

Search results

Summary of Contents for Pegasus3 R4

Reviews: