![background image](http://html.mh-extra.com/html/promise-technology/pegasus3-r4/pegasus3-r4_product-manual_1617248199.webp)
186
Promise
Technology
Pegasus3 R4/R6/R8
Returns drive 6 to spare status
When the Automatic Transition is finished, physical drives 1, 2, 3, and 4 belong to the disk array and
physical drive 6 is a revertible spare drive. The original configuration is restored.
Manual Transition
If you wanted to use the drive in slot 5 as a member of the disk array, rather than the drive in slot 3, you
would run the Transition function manually. See “Running a Transition on a Spare Drive” on page 71.
When the Manual Transition is finished, physical drives 1, 2, 4, and 5 belong to the disk array and
physical drive 6 is a revertible spare drive.
At this point, you would replace the drive in slot 3. The new drive in slot 3 remains unconfigured until you
assign it to a disk array or as a spare.
Summary of Contents for Pegasus3 R4
Page 4: ...iv Promise Technology Pegasus3 R4 R6 R8 VCCI KCC FCC ...
Page 5: ...v About this guide Pegasus3 Product Manual WARNING WARNING WARNING WARNING ...
Page 80: ...67 Managing the Pegasus3 Pegasus3 Product Manual Controller Settings ...
Page 207: ...194 Promise Technology Pegasus3 R4 R6 R8 View NVRAM Events ...