Promise Technology Pegasus3 R4 Product Manual Download Page 128

Page: 128 / 232

115

Managing the Pegasus3

Pegasus3 Product Manual

Task 4 – Summary

1. Review your choices of disk array, logical drives, and spare drive.

•

To make a change, click the

Back

button to reach the appropriate screen.

•

To accept, click the Submit button.

The disk array, logical drive, and spare drive take a few moments to create.

2. Click the

Finish

button to close the Wizard.

Formatting your Logical Drives

If you left the

Format

box checked under

Task 2 – Logical Drive Creation

, your logical drives are

formatted automatically.

If you UNchecked the

Format

box, you must format your logical drives manually.

When the Pegasus Utility has finished the partition and format operation, new removable-drive icons,

each representing one logical drive, appear on your desktop (right).

When you see the icon, your logical drive is ready to use.

Advanced Configuration - Configuration Summary

Summary of Contents for Pegasus3 R4








































































































































































































































Search results

Summary of Contents for Pegasus3 R4

Reviews:

Promise Technology Pegasus3 R4, Product Manual, Page: 128 / 232

Search results

Summary of Contents for Pegasus3 R4

Reviews: