![background image](http://html.mh-extra.com/html/promise-technology/pegasus3-r4/pegasus3-r4_product-manual_1617248133.webp)
120
Promise
Technology
Pegasus3 Series
Rebuilding a Disk Array
When you rebuild a disk array, you are actually rebuilding the data on one of its physical drives.
If there is no spare drive of adequate capacity, you must replace the failed drive with an unconfigured
physical drive, then perform a
Manual Rebuild
.
On the carrier with the failed drive, the Drive Power / Status LED is red and the Drive Activity LED is
dark.
That is the physical drive you must replace.
Red LED
Dark LED
Drive carrier LEDs for a dead or failed drive
Summary of Contents for Pegasus3 R4
Page 4: ...iv Promise Technology Pegasus3 R4 R6 R8 VCCI KCC FCC ...
Page 5: ...v About this guide Pegasus3 Product Manual WARNING WARNING WARNING WARNING ...
Page 80: ...67 Managing the Pegasus3 Pegasus3 Product Manual Controller Settings ...
Page 207: ...194 Promise Technology Pegasus3 R4 R6 R8 View NVRAM Events ...