Promise Technology Pegasus3 R4 Product Manual Download Page 97

Page: 97 / 232

Promise

Technology

Pegasus3 Series

Rebuild

When you rebuild a disk array, you are actually rebuilding the data on one physical drive.

•

When a physical drive in a disk array fails and a spare drive of adequate capacity is available, the

disk array begins to rebuild automatically using the spare drive.

•

If there is no spare drive of adequate capacity, but the

Auto Rebuild

function is ENABLED, the disk

array begins to rebuild automatically as soon as you remove the failed physical drive and install an

unconfigured physical drive in the same slot. See

“Making Rebuild Settings” on page 85.

•

If there is no spare drive of adequate capacity and the Auto Rebuild function is DISABLED, you

must replace the failed drive with an unconfigured physical drive, then perform a

Manual Rebuild

See “Rebuilding a Disk Array” on page 204 and ”Managing Spare Drives” on page 145. Also see

“Disk Array and Logical Drive Problems” on page 202.

Rebuild Settings

Summary of Contents for Pegasus3 R4








































































































































































































































Search results

Summary of Contents for Pegasus3 R4

Reviews:

Promise Technology Pegasus3 R4, Product Manual, Page: 97 / 232

Search results

Summary of Contents for Pegasus3 R4

Reviews: