Promise Technology Pegasus3 R4 Product Manual Download Page 140

Page: 140 / 232

127

Managing the Pegasus3

Pegasus3 Product Manual

Viewing Logical Drive Statistics

To view logical drive statistics:

1. Do one of the following actions:

•

Click the

Logical Drive

icon.

•

From the Storage menu, choose

Logical Drive

. The list of logical drives appears.

2. Mouse-over the logical drive you want then click the

View

button.

3. Click the

Statistics

tab.

4. Logical Drive statistics display, including:

•

Data Transferred – In megabytes

•

Read Data Transferred – In megabytes

•

Write Data Transferred – In megabytes

•

Errors

•

Non-Read/Write Errors

•

Read Errors

•

Write Errors

•

I/O Requests

•

Non-Read/Write I/O Requests

•

Read I/O Requests

•

Write I/O Requests

•

Statistics Start Time

•

Statistics Collection Time

5. Click the

icon to close the statistics panel.

To clear the check tables, see “Clearing Statistics” on page 58.

Logical Drive Statistics

Summary of Contents for Pegasus3 R4








































































































































































































































Search results

Summary of Contents for Pegasus3 R4

Reviews:

Promise Technology Pegasus3 R4, Product Manual, Page: 140 / 232

Search results

Summary of Contents for Pegasus3 R4

Reviews: