Promise Technology Pegasus3 R4 Product Manual Download Page 187

Page: 187 / 232

174

Promise

Technology

Pegasus3 R4/R6/R8

RAID 1E

A RAID 1E Source logical drive can migrate to the following Target logical drives:

Target

Requirements

RAID 0

None.

RAID 1E

Add physical drives.

RAID 5

3 physical drives minimum, 4 (R4), 6 (R6) or 8 (R8).
RAID 1E must have less than 4 (R4), 6 (R6) or 8 (R8) physical drives. If

existing physical drives have no unused space, add 1 or more physical

drives.

RAID 10

4 physical drives minimum. Even number of physical drives. If existing

physical drives have no unused space, add 1 or more physical drives.

RAID 50

6 physical drives minimum.

See “Migrating a Logical Drive” on page 144.

RAID 5

A RAID 5 Source logical drive can migrate to the following Target logical drives:

Target

Requirements

RAID 0

None.

RAID 1E

None.

RAID 5

Add physical drives. Maximum of 4 (R4), 6 (R6) or 8 (R8).

RAID 6

4 physical drives minimum, maximum of 4 (R4), 6 (R6) or 8 (R8). If

existing physical drives have no unused space, add 1 or more physical

drives.

RAID 10

4 physical drives minimum. Even number of physical drives. If existing

physical drives have no unused space, add 1 or more physical drives.

RAID 50

6 physical drives minimum.

RAID 60

8 physical drives minimum.

See “Migrating a Logical Drive” on page 144.

Summary of Contents for Pegasus3 R4








































































































































































































































Search results

Summary of Contents for Pegasus3 R4

Reviews:

Promise Technology Pegasus3 R4, Product Manual, Page: 187 / 232

Search results

Summary of Contents for Pegasus3 R4

Reviews: