![background image](http://html.mh-extra.com/html/promise-technology/pegasus3-r4/pegasus3-r4_product-manual_1617248018.webp)
5
Introduction
Pegasus3 Product Manual
LED Description
System Status*
The System Status LED located on the Power button lights blue when the Pegasus3
is operating normally. When the system is booting up, this lights orange and will light
blue when fully booted if there are no problems detected. A red System Status LED
indicates a serious problem such as an incomplete array or failed hard disk drive.
Thunderbolt Link
This LED will light blue when the Thunderbolt cable is connected, they remain dark
when there is no link.
Drive Status and
Activity*
The Drive Status LED lights blue when a physical drive is present and functioning
normally. A red Drive Status LED indicates a problem with the physical drive or an
array. The Drive Activity LED lights blue when the physical drive is present and blinks
blue when there is activity on the drive.
* See
for more details about using LED indicators for troubleshooting.
Summary of Contents for Pegasus3 R4
Page 4: ...iv Promise Technology Pegasus3 R4 R6 R8 VCCI KCC FCC ...
Page 5: ...v About this guide Pegasus3 Product Manual WARNING WARNING WARNING WARNING ...
Page 80: ...67 Managing the Pegasus3 Pegasus3 Product Manual Controller Settings ...
Page 207: ...194 Promise Technology Pegasus3 R4 R6 R8 View NVRAM Events ...