manualshive.com logo in svg

Promise Technology Pegasus3 R4, Product Manual, Page: 188 / 232

Share
Download
Promise Technology Pegasus3 R4 Product Manual Download Page 188

175

Technology Background

Pegasus3 Product Manual 

 

 

 

 

  

Target

Requirements

RAID 6

Add physical drives. Maximum of 4 (R4), 6 (R6) or 8 (R8).

RAID 60

8 physical drives minimum. 

See “Migrating a Logical Drive” on page 144.

RAID 6

A RAID 6 Source logical drive can migrate to the following Target logical drives:

RAID 10

A RAID 10 Source logical drive can migrate to the following Target logical drives:

When you migrate RAID 10 logical drive, it becomes RAID 1E by default.

If you want a RAID 10 logical drive, there must be an even number of physical drives and you must 

specify RAID 10 for the target logical drive.

See “Migrating a Logical Drive” on page 144.

Target

Requirements

RAID 0

None.

RAID 1E

None.

RAID 5

3 physical drives minimum, maximum of 4 (R4), 6 (R6) or 8 (R8). RAID 10 

must have less than 4 (R4), 6 (R6) or 8 (R8) physical drives.

RAID 6

4 physical drives minimum, maximum of 4 (R4), 6 (R6) or 8 (R8). The RAID 

10 logical drive must have less than 4 (R4) or 6(R6) physical drives.
If existing physical drives have no unused space, add 1 or more physical 

drives.

RAID 10

Add physical drives in multiples of two. Even number of physical drives.

RAID 50

6 physical drives minimum. 

RAID 60

8 physical drives minimum. 

Target

Requirements

RAID 0

None.

RAID 1E

Add physical drives.

RAID 5

3 physical drives minimum, 4 (R4), 6 (R6) or 8 (R8).
RAID 1E must have less than 4 (R4), 6 (R6) or 8 (R8) physical drives. If 

existing physical drives have no unused space, add 1 or more physical 

drives.

RAID 10

4 physical drives minimum. Even number of physical drives. If existing 

physical drives have no unused space, add 1 or more physical drives.

RAID 50

6 physical drives minimum. 

See “Migrating a Logical Drive” on page 144.

RAID 5

A RAID 5 Source logical drive can migrate to the following Target logical drives:

Target

Requirements

RAID 0

None.

RAID 1E

None.

RAID 5

Add physical drives. Maximum of 4 (R4), 6 (R6) or 8 (R8).

RAID 6

4 physical drives minimum, maximum of 4 (R4), 6 (R6) or 8 (R8). If 

existing physical drives have no unused space, add 1 or more physical 

drives.

RAID 10

4 physical drives minimum. Even number of physical drives. If existing 

physical drives have no unused space, add 1 or more physical drives.

RAID 50 

6 physical drives minimum. 

RAID 60

8 physical drives minimum. 

See “Migrating a Logical Drive” on page 144.

Summary of Contents for Pegasus3 R4









































































































































































































































Reviews:

No comments