![background image](http://html.mh-extra.com/html/promise-technology/pegasus3-r4/pegasus3-r4_product-manual_1617248022.webp)
9
Installation and Setup
Pegasus3 Product Manual
Summary of the setup procedure
The setup procedure for the Pegasus3 is simple and easy. The device is shipped with hard disk drives
installed and a RAID array configured, so it is just necessary to plug it in and connect the device.
However, you should install the Pegasus Utility software used for monitoring and administration of the
system. Mac users, please follow the setup procedure here or in the Quick Start Guide.
The setup process is summarized below.
1.
Unpack the Pegasus3 shipping package
2. Connect the power cord and power on the Pegasus3 R4/R6/R8.
3.
Connect the Pegasus3 to your computer with a Thunderbolt 3 cable.
4.
Mac users can locate the Pegasus Utility installation package located on the device (Pegasus3 is
shipped with RAID 5 configuration) and install the management software utility. Windows users
please skip ahead to
Summary of Contents for Pegasus3 R4
Page 4: ...iv Promise Technology Pegasus3 R4 R6 R8 VCCI KCC FCC ...
Page 5: ...v About this guide Pegasus3 Product Manual WARNING WARNING WARNING WARNING ...
Page 80: ...67 Managing the Pegasus3 Pegasus3 Product Manual Controller Settings ...
Page 207: ...194 Promise Technology Pegasus3 R4 R6 R8 View NVRAM Events ...