Promise Technology Pegasus3 R4 Product Manual Download Page 43

Page: 43 / 232

Promise

Technology

Pegasus3 Series

Step 6: Format with Pegasus Utility

Now you are ready to format the Pegasus3 with a the NTFS file system for use as a direct attached

storage system with your Windows computer. Use Pegasus Utility to format the RAID array and

perform other administrative functions including changing the type of RAID. For information on

the other tasks and functions of Pegasus Utility, please read the product manual. For the purpose

of this installation guide, only the basic setup using the default PROMISE Hardware RAID 5 array

is described. This type of RAID provides the best balance of performance and data safety. For

more information on other RAID types, please read the product manual

DO NOT use the Windows Disk Manager

to change the RAID on the Pegasus3. Any changes

to the RAID array must be done using Pegasus Utility.

Follow the instructions below for the Windows OS you are running:

• Windows 7 users, see

“Format Pegasus3 on Windows 7” on page 31.

• Windows 10 users, see “Format Pegasus3 on Windows 10” on page 35

Summary of Contents for Pegasus3 R4








































































































































































































































Search results

Summary of Contents for Pegasus3 R4

Reviews:

Promise Technology Pegasus3 R4, Product Manual, Page: 43 / 232

Search results

Summary of Contents for Pegasus3 R4

Reviews: