Promise Technology Pegasus3 R4 Product Manual Download Page 31

Page: 31 / 232

Promise

Technology

Pegasus3 R4/R6/R8

To Create a Disk Array and Logical Drive

The Pegasus3 is shipped with HDD installed and a RAID array configured, so it is not necessary to do

this yourself. However, if you want to change the disk drives or configure a different RAID, you will need

to create an array and logical drive to use the storage.

If you are installing new disk drives, use the Wizard to create a disk array and logical drive. The

procedures are described in the next chapter.

To see the

Wizard

menu, launch the Pegasus Utility, in the

Dashboard

menu, under

System Status

click the Disk Array link. See page 52

for an overview of the Pegasus Utility interface.

The Wizard dialog box opens with three configuration methods.

Wizard dialog box

Choose the best method for your situation. See the table below.

Method

User options

Suggested for users who are

See

Automatic

None

New to data storage

page 113

Express

General parameters

Familiar with data storage

page 114

Advanced

Individual parameters

Data storage professionals

page 116

Summary of Contents for Pegasus3 R4








































































































































































































































Search results

Summary of Contents for Pegasus3 R4

Reviews:

Promise Technology Pegasus3 R4, Product Manual, Page: 31 / 232

Search results

Summary of Contents for Pegasus3 R4

Reviews: