Promise Technology Pegasus3 R4 Product Manual Download Page 122

Page: 122 / 232

109

Managing the Pegasus3

Pegasus3 Product Manual

Choosing Automatic Configuration

To use the Automatic Configuration Wizard:

1. From the Storage menu choose

Wizard

2. Click the

Automatic

button.

The Automatic Configuration dialog box appears.

3. Do one of the following actions:

• If you agree with the proposed configuration, click the Submit button.

The Wizard creates your disk array and logical drive. If you have a Pegasus R6, the Wizard

also creates a spare drive.

• If you do NOT agree with the proposed configuration, click the

Cancel

button to return to

the original Automatic Configuration menu.

Automatic Configuration dialog box

Summary of Contents for Pegasus3 R4








































































































































































































































Search results

Summary of Contents for Pegasus3 R4

Reviews:

Promise Technology Pegasus3 R4, Product Manual, Page: 122 / 232

Search results

Summary of Contents for Pegasus3 R4

Reviews: