Reference 6202-WA-DFNT-DFCM3
♦
ProLinx Gateway
Wireless EtherNet/IP to DF1 Master/Slave-3 ports
ProSoft Technology, Inc.
Page 99 of 190
February 2, 2009
5 Reference
In This Chapter
Product
Specifications ........................................................................... 99
Exchange
Configuration Form............................................................. 102
Radio
Status Data ............................................................................... 103
Radio
Networks and Security .............................................................. 106
SNTP
Support ..................................................................................... 108
Radio DF1 Pass-Through Server ........................................................ 109
DFNT
Reference ................................................................................. 117
DFCM
Reference ................................................................................ 160
5.1 Product
Specifications
In Server mode, the module accepts commands from one or more clients to
read/write data stored in the module's internal registers.
Supported PLC Types
PLC2, PLC5, SLC and ControLogix file types supported
Internal Database
Data Table File Size: 100 or 1000 words
Data Table File Start: N10 to N109 (based on file size set to 100) or
N10 to N19 (based on file set to 1000)
CIP Services Supported
0x4C - CIP Data Table Read
0x4D - CIP Data Table Write
EtherNet/IP Client
In Client mode, the module controls the read/write data transfer between the
gateway and other EtherNet/IP devices. Data transfer can be initiated and
executed without any ladder programming being required in the Rockwell
Automation hardware.
Command List
Support for 100 commands per client, each configurable for command,
IP address, register to/from addressing and word/bit count.
Polling of command list
User configurable polling of commands, including disabled, continuous
and on change of data (write only).
Configurable Parameters Number of commands (Up to 100 per client)
Min Command Delay
Response Timeout
Retry Count
Command Error Pointer
Functional Specifications - DF1 Master/Slave
The DF1 Master/Slave Protocol driver provides extensive support for both Master
and Slave implementations of the protocol. The serial port on the gateway is
user-configurable to support the DF1 protocol (Master or Slave, Error Checking,
Baud rate, etc).
Summary of Contents for 6202-WA-DFNT-DFCM3
Page 4: ......