ProLinx 6202-WA-DFNT-DFCM3, User Manual, Page: 32 / 190

6202-WA-DFNT-DFCM3 ♦ ProLinx Gateway Configure the Module
Wireless EtherNet/IP to DF1 Master/Slave-3 ports
Page 32 of 190 ProSoft Technology, Inc.
February 2, 2009
2.5.6 [Radio DF1 Pass-Through Server]
Note: This section of the configuration file is applicable to third party port re-routing software that
can RSLinx a serial port driver to an IP address port. When such software is not neccesary, this
section is ignored by the module.
Enabled
Yes or No
This parameter determines if the server will be utilized by the module. If a value
of 'Yes' is entered, the server will be used. Any other value will disable the
server.
Service Port Number
1 to 65535
This parameter sets the TCP/IP service port for this server. Each server can
have its own unique service port or can share the same number with other
servers.
Busy Timeout
100 to 65535 milliseconds
This parameter sets the number of milliseconds the server will wait for the pass-
through port to become available. Valid data range for this parameter is 100 to
65535.
2.5.7 [Radio DFNT Client 0]
This section is used to define the configuration for the master device simulated
on network port