6202-WA-DFNT-DFCM3
♦
ProLinx Gateway
Diagnostics and Troubleshooting
Wireless EtherNet/IP to DF1 Master/Slave-3 ports
Page 62 of 190
ProSoft Technology, Inc.
February 2, 2009
Viewing SNTP Status
Press
[Z]
to view configuration information about the SNTP client.
Refer to SNTP Support (page 108) for more information on configuring and using
this function.
Transferring the Configuration File from ProLinx module to PC
Press
[S]
to receive (download) the configuration file from the module to your
PC.
Press
[Y]
to confirm the file transfer, and then follow the instructions on the
terminal screen to complete the file transfer process.
After the file has been successfully downloaded, you can open and edit the file to
change the module's configuration.
Resetting diagnostic data
Press
[U]
to reset the status counters for the client and/or servers in the module.
Viewing Version Information
Press
[V]
to view Version information for the module.
Use this command to view the current version of the software for the module, as
well as other important values. You may be asked to provide this information
when calling for technical support on the product.
Values at the bottom of the display are important in determining module
operation. The Program Scan Counter value is incremented each time a
module's program cycle is complete.
Tip:
Repeat this command at one-second intervals to determine the frequency of program
execution.
Summary of Contents for 6202-WA-DFNT-DFCM3
Page 4: ......