ProLinx 6202-WA-DFNT-DFCM3, User Manual, Page: 161 / 190

Reference 6202-WA-DFNT-DFCM3 ♦ ProLinx Gateway
Wireless EtherNet/IP to DF1 Master/Slave-3 ports
ProSoft Technology, Inc. Page 161 of 190
February 2, 2009
DF1 Ports - Error/Status Data
The serial port (DF1 Master/Slave) Error and Status Data areas are discussed in
this section. The Error Status Pointer value is configured in the CFG file within
each of the individual [DF1 PORT X] sections.
The data area is initialized with zeros whenever the module is initialized. This
occurs during a cold-start (power-on), reset (reset push-button pressed) or a
warm-boot operation (commanded or loading of new configuration).
Example Internal
Database Address Offset Description
6300 0 Number of Command Requests
6301 1 Number of Command Responses
6302 2 Number of Command Errors
6303 3 Number of Requests
6304 4 Number of Responses
6305 5 Number of Errors Sent
6306 6 Number of Errors Received
6307 7 Configuration Error Word
6308 8 Current Error Code
6309 9 Last Error Code
Refer to the following Error Codes section to interpret the status/error codes
present in the data area.
Master Port: Command Errors
The individual command errors for each master port are returned to the address
locations specified in the following table.
DF1 Port Address Range
0 6310 to 6409
1 6710 to 6809
2 7110 to 7209
3 7510 to 7609
The first word in the register location defined contains the status/error code for
the first command in the port's command list. Each successive word in the
command error list is associated with the next command in the list.
Refer to Error Codes to interpret the status/error codes present in the data area.
Example DF1 Port 1 Command List Errors
Internal Database
Address (Example) Offset Description
6310 0 Command #0 Error Status
6311 1 Command #1 Error Status
6312 2 Command #2 Error Status
6313 3 Command #3 Error Status
6314 4 Command #4 Error Status