ProLinx 6202-WA-DFNT-DFCM3, User Manual, Page: 18 / 190

6202-WA-DFNT-DFCM3 ♦ ProLinx Gateway Configure the Module
Wireless EtherNet/IP to DF1 Master/Slave-3 ports
Page 18 of 190 ProSoft Technology, Inc.
February 2, 2009
2.1 Set Up the Project
To begin, start ProSoft Configuration Builder. If you have used Windows
configuration tools before, you will find the screen layout familiar. ProSoft
Configuration Builder's window consists of a tree view on the left, an information
pane and a configuration pane on the right side of the window. When you first
start ProSoft Configuration Builder, the tree view consists of folders for Default
Project and Default Location, with a Default Module in the Default Location
folder. The illustration below shows the ProSoft Configuration Builder window
with a new project.
Your first task is to add the 6202-WA-DFNT-DFCM3 module to the project.
1 Use the mouse to select "Default Module" in the tree view, and then click the
right mouse button to open a shortcut menu.