6202-WA-DFNT-DFCM3
♦
ProLinx Gateway
Reference
Wireless EtherNet/IP to DF1 Master/Slave-3 ports
Page 154 of 190
ProSoft Technology, Inc.
February 2, 2009
PLC5 Write Commands
Write commands transfer data from the PLC5 processor to the DFNT module. An
example rung used to execute a write command is shown in the following
diagram:
In order to complete the configuration of the MSG instruction, select the
Setup
Screen
area of the MSG object. This displays the following dialog box.
Select the
Communication Command
to execute from the following list of
supported commands.
PLC5
Type
Write
PLC2 Unprotected Write
PLC5 Typed Write to PLC
PLC Typed Logical Write
The
Target Device Data Table Address
must be set to a valid file element (that
is, N11:0) for SLC and PLC5 messages. For the PLC2 Unprotected Write
message, set the address to the database index (that is, 1000) to consider with
the command.
Summary of Contents for 6202-WA-DFNT-DFCM3
Page 4: ......