ProLinx 6202-WA-DFNT-DFCM3, User Manual, Page: 35 / 190

Configure the Module 6202-WA-DFNT-DFCM3 ♦ ProLinx Gateway
Wireless EtherNet/IP to DF1 Master/Slave-3 ports
ProSoft Technology, Inc. Page 35 of 190
February 2, 2009
Command Entry Formats
The format of each command in the list is dependent on the function being
executed. Refer to Command Function Codes (page 35, page 117) for a
complete discussion of the commands supported by the module and of the
structure and content of each command.
The following table shows the structure of the configuration data necessary for
each of the supported commands.
Module Information Data Device Information Data
Column
# 1 2 3 4 5 6 7 8 9 10 11 12
Function
Code Enable
Code Internal
Address Poll
Interval
Time Count Swap
Code
IP
Address Slot
Number Function
Code Function Parameters
FC 1 Code Register Seconds Count Code Node Slot 1 Word
Address
FC 2 Code Register Seconds Count Code Node 2 Word
Address
FC 3 Code Register Seconds Count Code Node 3 Word
Address
FC 4 Code Register Seconds Count Code Node 4 Word
Address
FC 5 Code Register Seconds Count Code Node 5 Word
Address
FC 100 Code Register Seconds Count Code Node 100 File
Number
Element Sub-
Element
FC 101 Code Register Seconds Count Code Node 101 File
Number
Element Sub-
Element
FC 102 Code Register Seconds Count Code Node 102 File
Number
Element Sub-
Element
FC 150 Code Register Seconds Count Code Node 150 File
String
FC 151 Code Register Seconds Count Code Node 151 File
String
FC 152 Code Register Seconds Count Code Node 152 File
String
FC 501 Code Register Seconds Count Code Node 501 File
Type
File
Number Element
FC 502 Code Register Seconds Count Code Node 502 File
Type
File
Number Element Sub-
Element
FC 509 Code Register Seconds Count Code Node 509 File
Type
File
Number Element
FC 510 Code Register Seconds Count Code Node 510 File
Type
File
Number Element Sub-
Element
FC 511 Code Register Seconds Count Code Node 511 File
Type
File
Number Element Sub-
Element
IP Address = IP address of processor to reach
Slot Number = -1 for PLC5 & SLC, processor slot number of ControlLogix 5550