Configure the Module
6202-WA-DFNT-DFCM3
♦
ProLinx Gateway
Wireless EtherNet/IP to DF1 Master/Slave-3 ports
ProSoft Technology, Inc.
Page 55 of 190
February 2, 2009
Station_Name
An alphanumeric string with a maximum of 32 ASCII characters that will identify
your station on the wireless network.
Valid Values: any character in the range of "A to Z", "a to z" and "0 to 9".
Channel
0 to 14 (Default 10)
Channel this module will use on the wireless network. Used for creating Ad hoc
link. Channels 1 to 14 are available. FCC allows for channels 1 to 11, ETSI
(Europe) channels 1 to 13, France channels 1 to 9, Japan channels 1 to 14.
Contact ProSoft Technology for country approval list.
All modules for the same network should use the same channel number.
Enable_Encryption
Y = Yes. Enable WEP encryption
N = No. Do not enable WEP encryption
(Default = N)
Enables or Disables WEP encryption.
When this parameter is enabled, you can:
Select up to four key for decrypting data received via the wireless interface.
Select one Transmit key for encrypting data that will be transmitted via the
wireless interface.
If you decide to enable encryption, please note that all stations will be configured
with identical WEP key values.
WEP_Key_1 to WEP_Key_4
5-character ASCII key or 10-digit hexadecimal key for 64-bit encryption.
13-character ASCII key or 26-digit hexadecimal key for 128-bit encryption.
Identifies one of the four keys your station device can use to decrypt data
received via its wireless interface. 64-bit or 128-bit encryption is selected by the
number of characters.
The key value is case-sensitive. Hexadecimal values must be preceded by "0x".
All wireless clients and access points should be configured with identical key
values.
Note:
Use only WEP Key 1 when communicating with an RLX-IH access point/repeater.
Transmit_WEP_Key
Selects which WEP key to use for encryption.
Summary of Contents for 6202-WA-DFNT-DFCM3
Page 4: ......